Tc-electronic G-System Manual de usuario Pagina 44
- Pagina / 81
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
GFX1 Vol. Type – GFX1 Exp. Type
CTRL Vol. Type – CTRL Exp. Type
These four parameters refer to the four Expression Pedal
connectors. Use these parameters to tell the G-System
what type of pedals you have connected.
• Moment
ary: Use this setting if you have connected a
pedal with a momentary switch – in other words, a
switch type that is only active as long as it is pressed,
such as a keyboard hold pedal.
• Alternating:
Use this setting if you have connected a
pedal with an alternating switch type. The alternating
switch type is a switch that stays in one position once
it is pressed and needs to be pressed once more to
return to its previous state.
• Exp or V
ol: Select whether it is a volume or an
expression pedal you have connected.
As explained on page 40, regular volume pedals
should only be used to control volume parameters.
Expression pedals work well with all types of
parameters.
Vol Master & Exp. Master
When a preset change occurs, the value of a parameter
can be controlled either by the expression pedal or the
preset. This parameter determines which of the two
applies.
There are two options for parameters assigned to pedals:
Preset:
The parameter value stored as part of the preset
rules – regardless of the current position of the
expression pedal controlling the parameter.
Global:
The position of the expression pedal is identified
at the moment of preset change, and the value stored as
part of the preset is overwritten by the pedal.
Example:
Let us say you are using your pedal to control Delay mix
in preset #1. In preset #2, you want to use the pedal to
control the Whammy Pitch parameter. Preset # 2 is set up
with the Pitch parameter set to 0%. Because you just used
your pedal for Delay mix in preset #1, you leave it at 15%.
The big question is: When you change to preset #2, do
you want the Pitch parameter to stay at 0% – as it is
programmed in the preset –, or do you want the pitch to
“grab” the 15% position of the pedal?
By setting the Exp. Master parameter to “Global”, the
current pedal position affects the controlled parameter
immediately after the preset change.
By setting the Exp. Master or Vol. Master parameter to
“Preset", the preset value rules at preset change.
The expression pedal will take control of the parameter
only once you touch the pedal after preset change.
Do you want your volume pedal to be global, i.e.
not affected by preset changes?
Set the Vol. Master parameter to “Global” and
you are in business.
Calibrating Expression Pedals
GFX1 Vol. Calib. – GFX1 Exp. Calib.
CTRL Vol. Calib. – CTRL Exp. Calib.
As different manufacturers deliver expression and
volume pedals with varying potentiometer types, it is
important to calibrate the connectors on the G-System to
the connected pedals for optimal performance.
Calibrating – Step by Step:
• Make sure that you have connected your pedal to the
Volume or Expression Inputs.
• Select one of the four expression pedal connectors you
want to calibrate. Select between:
GFX1 Vol. Calib. – GFX1 Exp. Calib.
CTRL Vol. Calib. – CTRL Exp. Calib.
• Press ENTER.
• The LCD now reads “Set Min”.
• Place your pedal in minimum Position (“Heel down”)
and press ENTER.
MENU MODE – PEDALS
42
- Users Manual 1
- IMPORTANT SAFETY INSTRUCTIONS 3
- TABLE OF CONTENTS 5
- INTRODUCTION 7
- QUICK SETUP GUIDE 10
- Play mode 15
- OVERVIEW 16
- TYPICAL SETUPS 24
- Connections 30
- G-System Separated: 30
- GFX01 in a Rack 30
- Important! 30
- ADDITIONAL SETUP INFORMATION 31
- Introduction 32
- What is a preset? 32
- Factory Presets/User presets 32
- Editing 33
- Overview 34
- Preset Handle Mode 34
- Deleting a Preset 35
- MENU MODE – OVERVIEW 36
- MENU MODE – PRESET ROUTING 37
- Left/Right Output levels 39
- Routing Lock 39
- LEVELS MENU 40
- Input Gain 0dB 40
- BOOST FUNCTION 41
- MENU MODE – PEDALS 42
- Setting up Your Pedals 43
- Using Expression Pedals to 45
- Control Specific Parameters 45
- Switch Numbers 46
- MENU MODE – SWITCHES 47
- MIDI MENU 48
- MIDI Channel: 1 48
- PrgMap: 00-2 to 6 48
- MENU MODE – UTILITY 49
- - Utility continued 50
- EDIT A EDIT B EDIT C 51
- THE TUNER 52
- BPM TEMPO TIME 53
- 94 638ms 53
- EFFECTS – FILTER 54
- EFFECTS – COMPRESSOR 58
- EFFECTS – MOD 60
- EFFECTS – PITCH 67
- EFFECTS - PITCH 70
- EFFECTS – DELAY 71
- EFFECTS – REVERB 74
- EFFECTS – REVERB & EQ 75
- EFFECTS – NOISE GATE 76
- MIDI IMPLEMENTATION CHART 77
- PRESET LIST 79
- TECHNICAL SPECIFICATIONS 81
Relacionado con productos y manuales para Instrumentos musicales Tc-electronic G-System
(31 paginas)
(14 paginas)Philips SRU3005/27 manuales
Manuales del propietario y guías del usuario para Reproductores de dvd Philips SRU3005/27.
Ofrecemos manuales en pdf Philips SRU3005/27 para descargar gratis por tipos de documentos:
Comentarios a estos manuales